b'REPAIR & SEALING MATERIALMINICOMBITYRE REPAIR AdvancedConnectionsEurope with REMA TIP TOP MINICOMBI1 2 3Maximum number of repairs carried out with MINICOMBI repair plugs in one tyre. Always check whether repairs already carried out in the tyre are defective. Axial distance between repairs: Tyre Careminimum 15 cm/6.VALID IN ACCORDANCE WITH BS AU 159g:20133 4,5 6 8 10Locate and mark the damage. *Determine the direction of theClean the repair area using Repairable area= max. damage sizeTake or screw out the foreign object. puncture channel. LIQUID BUFFER and a scraper. in % of the treadMinicombi width(Nominal SectionSpeed*NOTE: Width)Index A3 A4.5 A6 B8 B10For combination plug-patch rre sphaailrltbhee 1 m5ll b img a or uamng les a angle from the pise arp tewnod piciuelcae repair sha . xFe used tomraexaitmeru tmha ann tghle of 25.-J 26mm max4 5 50% K-T3mm max 1H-ZR3mm max60% -Vto 70%6mm maxNominal Section Width -Vup to 155mm - 60%155mm - 200mm - 65%Above 200mm - 70%For SST Runflat -ZR-WConstruction tyres also Prepare the puncture channel first from the tyreBuff the inner liner until you get a completelytaken into accountinside outwards, then from the outside to the inside.smooth surface (RMA-2) and clean the buffed area.max. LI = 17760%6 7 8 to 70%10mm maxNominal Section Wup to 225mm - 60%idth225mm - 305mm - 65%Above 305mm - 70%Commercial vehicle tyres y after exhibiting a 10mm injurpreparation should be restricted to 50% of the nominal section lustra-width in the grey area ilted.Apply CEMENT FD-BL on the buffedPull the MINICOMBI plug outwardsSeal the MINICOMBI base and any70%surface, fill the puncture channelas far as possible and stitch thestill exposed buffed areas with with fresh cement and immediatelyMINICOMBI base. INNERLINER SEALER, reinflate insert the MINICOMBI plug. mounted tyre and then cut the stem.10mm maxi REPAIR CHART SUBJECT TO TECHNICAL ALTERATIONS Printed in UK 03/2017For detailed guidance on repair limits please consult the MINICOMBI MINOR DAMAGE TYRE REPAIR CHART2845811791_A1_Poster_MINICOMBI_480x700_UK.indd 1 02/03/2017 15:21'